Is it really possible to install a DIY splashbacks myself?

Absolutely! While it requires careful measuring and a bit of patience, installing a glass splashback yourself is definitely achievable for most DIY enthusiasts. There are many helpful tutorials and guides available online to walk you through the process step-by-step.

What tools and materials will I need for a DIY glass splashback installation?

Your custom-cut glass splashback. A strong adhesive specifically designed for glass (check compatibility with your wall surface). A sealant suitable for kitchens and bathrooms (to seal edges). Measuring tape, pencil, and possibly a laser level for accurate placement. A caulk gun for applying the sealant. Clean cloths and a glass cleaner.

How do I accurately measure for my glass splashback?

Precise measurements are crucial! Measure the width and height of the area you want to cover in several places, as walls can sometimes be slightly uneven. It's generally recommended to subtract a few millimeters (e.g., 2-3mm) from each edge to allow for slight discrepancies and for applying the sealant. Double and triple-check your measurements before ordering your glass.

How do I attach the glass splashback to the wall?

The most common method is using a strong, neutral-cure silicone adhesive specifically designed for bonding glass to various surfaces. Apply the adhesive in vertical beads or blobs across the back of the glass, avoiding the edges. Carefully position the splashback against the wall, pressing it gently but firmly into place. You may need temporary supports (like painter's tape) to hold it in position while the adhesive cures completely (follow the adhesive manufacturer's instructions for drying time).

How do I clean and maintain my glass splashback?

Cleaning a glass splashback is one of its biggest advantages! Simply wipe it down with a soft cloth and a standard glass cleaner. For tougher grease splatters, you can use a mild dish soap solution, ensuring you rinse and dry the surface thoroughly afterwards to avoid streaks. Avoid using abrasive cleaners or scouring pads as they can scratch the glass.

Bespoke glass kitchen splashback with mirrored finish, reflecting modern dining area and cookware

Made for your kitchen

DIY Splashbacks

Explore colour, reflection and printed designs. Choose a finish that works with your kitchen, then open a product or ask us to plan your fitted project.

Browse products Compare samples

Bespoke project advice · Product-specific options · Confirm your specification before ordering

Plan your next step

From inspiration to a considered kitchen.

Compare finishes in your own room, then confirm the panel layout, sockets and clearances before ordering.

Discuss your project Explore finish samples →

Choosing glass splashbacks for your kitchen

Start with the appearance: compare a single colour, the reflections of mirror glass, a printed design or the lighting of backlit glass. Your cabinetry, worktop and lighting will influence how each finish feels in the room.

Plan the panels before manufacture

Open the relevant product to review its material, dimensions and ordering options. Where a bespoke configurator is available, use it to enter your panels and machining requirements. Confirm all finished dimensions and cut-outs before manufacture; toughened glass cannot be trimmed or drilled afterwards. The product configuration and checkout provide the applicable price and delivery details.

Use our measuring guide to plan the layout. Any installation behind a hob needs the correct glass specification and appliance clearances; decorative finishes are not interchangeable for every position.

Approve the finish in your own light

Browse finish samples where available. Screens give an approximation of colour and texture. For survey, supply and installation, send photographs, your postcode and approximate dimensions to confirm coverage and project scope.

DIY Splashbacks: your questions

How do I order a bespoke splashback?

Open a product and follow its available configuration or enquiry route. Confirm finished panel sizes, shapes and cut-outs before manufacture.

Can I compare finishes first?

Browse available samples and compare them with your cabinetry, worktop and lighting.

Is every finish suitable behind a hob?

No. Confirm the exact glass specification, appliance clearances and installation before ordering.

Can you survey and install?

Send your postcode, photographs and approximate dimensions so we can confirm coverage and quote for the scope.

More about DIY Splashbacks

DIY Splashbacks are the supply-only route for customers who want to provide their own dimensions and arrange installation independently.

This option suits straightforward panel layouts where you are confident measuring the wall and taking responsibility for the manufacturing sizes, cut-outs and installation.

Before You Order

Check final panel dimensions carefully.
Confirm sockets, cut-outs and other required processing before manufacture.
Consider access, wall condition and appliance clearances.
Make sure the selected glass specification is suitable for the intended position.

Once made, toughened or otherwise processed glass cannot normally be altered in the same way as standard sheet material, so accurate information before manufacture is essential.

Prefer a Professional Survey?

If the layout is complex or you want CreoGlass to establish manufacturing dimensions and install the finished glass, use the Kitchen Glass Splashbacks route or contact us.

Explore Finishes

Made for your kitchen

DIY Splashbacks

DIY Splashbacks

From inspiration to a considered kitchen.

Choosing glass splashbacks for your kitchen

Plan the panels before manufacture

Approve the finish in your own light

DIY Splashbacks: your questions

Before You Order

Prefer a Professional Survey?

Explore Finishes

Related collections