Can I cut or drill a printed gradient glass splashback myself if needed?

Generally, it is strongly NOT recommended to cut or drill a tempered glass splashback, especially one with a printed design. Tempered glass is specifically treated for strength, and any attempt to cut or drill it after the tempering process can cause it to shatter.

What are the absolute "do nots" or critical mistakes to avoid when DIY-installing glass splashback

-Incorrect Measurements: Failing to measure accurately is the most common mistake. Double, triple, and even quadruple-check your dimensions. Remember to account for any potential obstructions or unevenness. Ordering glass that is too small or too large will lead to significant issues. -Using the Wrong Adhesive: Employing an adhesive not specifically designed for glass or incompatible with your wall surface can result in poor adhesion, slippage, or even damage to the printed layer. Always follow the adhesive manufacturer's recommendations. -Applying Excessive Force: Glass, even tempered glass, can crack or break under excessive pressure, especially if there are any underlying imperfections on the wall. Apply gentle, even pressure when positioning the splashback. -Ignoring Safety Precautions: Always wear safety glasses and gloves to protect yourself from sharp edges and potential chemical irritants in adhesives and sealants. -Attempting to Cut or Drill After Tempering: As mentioned before, this is a major safety hazard and will likely shatter the glass and ruin the print. All necessary cuts and drill holes must be done by the manufacturer before the glass is tempered and printed. -Rushing the Process: DIY projects often go wrong when rushed. Take your time with each step, from measuring to applying adhesive and sealing. Allow adequate drying time for the adhesive before removing any temporary supports.

Teal ombre decorative glass splashback in modern kitchen with induction hob and extractor hood

A design that sets the mood

Gradient Splashbacks - DIY

Find a printed design that belongs in your kitchen—from quiet textures to expressive artwork. Explore the collections before choosing your panel sizes and final crop.

Browse products Discuss your project

Bespoke project advice · Product-specific options · Confirm your specification before ordering

A design that sets the mood

Find your design direction

Plan your next step

The right design. The right crop.

Consider panel joints, proportions and socket positions when planning your artwork.

Discuss your project Explore related designs →

Planning a printed glass splashback

Begin with the visual direction: abstract designs create expressive focal points, landscapes suggest depth, and stone-inspired prints offer a textured appearance. Review each product for its glass specification and ordering route.

Allow for the shape of your kitchen

A square design may need a different crop for a long splashback. Panel joints, corners and sockets affect the composition. Share a measured layout so important details can be considered around cut-outs. The artwork and panel layout should be approved before manufacture.

Check artwork and suitability

For your own photograph or design, discuss original file quality and usage rights. A larger file does not automatically give a sharp print at the required size. An installation photograph is not a substitute for original printable artwork. Confirm glass specification and hob clearances for your location.

Compare backlit splashbacks if illumination is part of your plan, or wall art for a separate feature. Send your design idea, photographs and dimensions to discuss the next step.

Gradient Splashbacks - DIY: your questions

Will the design be cropped?

The artwork must be planned for the final proportions, joints and cut-outs. Approve the final layout before manufacture.

Can I use my own image?

Ask us to assess the original artwork, required print size and your permission to use it.

Do all designs use the same configurator?

Ordering options vary by product. Open the selected design to use its existing options, or contact us for a bespoke enquiry.

Can printed glass be backlit?

Backlit products need a coordinated glass, artwork and lighting specification. Discuss the installation with us.

More about Gradient Splashbacks - DIY

DIY gradient glass splashbacks offer a supply-only route to smooth colour-transition designs for modern kitchens.

Select the design and size that suits your project, then make sure the dimensions, wall condition and installation arrangement are appropriate before ordering. Colours can look different under different lighting, so review product imagery and samples where available.

Planning a DIY Gradient Splashback

Accurate measurements are essential. Any cut-outs, unusual shapes, panel divisions and suitability near appliances should be confirmed before manufacture. Installation methods vary depending on the panel and supporting surface.

Prefer a Bespoke Installation?

For professional survey and installation, explore Gradient Printed Splashbacks. For a more decorative finish, see Gradient Extra Splashbacks.

More DIY Designs

Browse the wider DIY Splashbacks range or the complete Printed Glass Splashbacks collection.