DIY SPLASHBACKS

Absolutely! While it requires careful measuring and a bit of patience, installing a glass splashback yourself is definitely achievable for most DIY enthusiasts. There are many helpful tutorials and guides available online to walk you through the process step-by-step.

Your custom-cut glass splashback. A strong adhesive specifically designed for glass (check compatibility with your wall surface). A sealant suitable for kitchens and bathrooms (to seal edges). Measuring tape, pencil, and possibly a laser level for accurate placement. A caulk gun for applying the sealant. Clean cloths and a glass cleaner.

Precise measurements are crucial! Measure the width and height of the area you want to cover in several places, as walls can sometimes be slightly uneven. It's generally recommended to subtract a few millimeters (e.g., 2-3mm) from each edge to allow for slight discrepancies and for applying the sealant. Double and triple-check your measurements before ordering your glass.

The most common method is using a strong, neutral-cure silicone adhesive specifically designed for bonding glass to various surfaces. Apply the adhesive in vertical beads or blobs across the back of the glass, avoiding the edges. Carefully position the splashback against the wall, pressing it gently but firmly into place. You may need temporary supports (like painter's tape) to hold it in position while the adhesive cures completely (follow the adhesive manufacturer's instructions for drying time).

Cleaning a glass splashback is one of its biggest advantages! Simply wipe it down with a soft cloth and a standard glass cleaner. For tougher grease splatters, you can use a mild dish soap solution, ensuring you rinse and dry the surface thoroughly afterwards to avoid streaks. Avoid using abrasive cleaners or scouring pads as they can scratch the glass.